![]() ![]() Left split: Main Ch 1, Per-Note Chs 2-8 Right split: Main Ch 16, Per-Note Chs 9-15 Bend Range: 48 (This uses the hidden setting "Any Bend Range". The button's light will turn light blue and these settings will be set as follows: Hidden Setting: Force MPE Settings Hold this button for more than 1/2 second to instantly change other relevant Per-Split Settings for MPE compatibility. Messages common to all notes (like Program Change, Sustain/CC64 or Volume/CC7) are sent over the Main channel, or if no Main channel is selected, redundantly over all Per Note Channels. Played notes are rotated through the assigned Per-Note Channels (see "MIDI Channels" below). MIDI Mode: One Channel Main Channel: 1 Bend Range: 2 Timbre/Y: CC74 Loudness/Z: Poly PressureĢ) ChPerNote (Channel Per Note, also called MPE for MIDI Polyphonic Expression) Each touch is sent on its own unique MIDI channel, permitting independent 3D control for each simultaneous touch. Tip: For best compatibility with standard one-channel (not MPE) synths and their preset sounds, which are optimized for traditional MIDI keyboards, use these settings: Click here to learn about LinnStrument's Smart MIDI, which prevents conflicts over a single MIDI channel when playing simultaneous pitch slides or Y-axis movements. This is LinnStrument's default setting, making it compatible with every MIDI sound generator in existence, because all traditional MIDI keyboards send over a single MIDI channel. ![]() There are three different ways that LinnStrument can send its MIDI information:ġ) One Chan (One Channel) All touches are sent over a single MIDI channel, called the Main channel. And you can quickly switch between them while playing by double-tapping the Split button. If RIGHT is selected, the settings in the leftmost 14 columns apply to the Right Split.Īlso, when Split mode is off, the entire playing surface will use either the Left or Right Split's settings, depending on which Split is selected here. If LEFT is selected here, the settings in the leftmost 14 columns apply to the Left Split. The Per-Split Settings screen includes two sets of settings- one for the Left Split and another for the Right Split. This is better for one-handed use: turn on Per-Split Settings, change a setting, then press Per-Split Settings again to turn it off.Įach of the Per-Split Settings is explained below. Or if tapped briefly (held less than 1/2 second), it toggles between on and off with each press. This is used for fast changes: hold Per-Split Settings, change a setting with your other hand, then releasing Per-Split Settings. If held for more than 1/2 second, it is momentary, staying on only as long as you hold it. Tip: The Per-Split Settings button has both momentary and toggle action: For example, if the highest note pad in column 1 is lit, this indicates that "One Chan" is selected. For each column, the status of the uppermost printed setting is indicated by the uppermost note pad the status of the second-from-top printed setting is indicated by the second-from-top note pad etc. Now the upper four rows of lights indicate the status of the Per-Split Settings printed directly above each column. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |